Garage Door Cost Breakdown: The Hollywood Homeowner's Reference for 2026

Garage Door Cost Breakdown: The Hollywood Homeowner’s Reference for 2026

When a cost guide says “spring replacement costs $150 – $350,” it isn’t accounting for the South Florida labor premium, the type of spring system on your door, or whether one spring or two needs replacing. Those ranges are so broad they’re functionally useless for planning. This guide is different. We’ve built it around what we actually see on service calls across Hollywood, FL: line-item pricing tied to this market, the specific failure points caused by salt air and humidity, and the Florida permit rules that catch homeowners off guard. By the time you finish reading, you’ll know what a fair quote looks like in 2026, where contractors pad numbers, and where cheap parts come back to haunt you.

Call (833) 589-8332

If you need a repair right now, call Benchmark Garage Door Repair in Hollywood at (833) 589-8332. If you’re in research mode, keep reading. This is the reference guide we wish every Hollywood homeowner had before their first estimate.

Quick Answer

In Hollywood, FL, expect to pay between $180 and $340 for a standard torsion spring replacement, $95 to $225 for a cable repair, $350 to $900 for a single panel replacement, $175 to $450 for an opener repair, and $1,400 to $3,800 for a full garage door replacement in 2026. These figures assume a typical single or double residential door and a licensed, insured contractor. Permit fees for full installations add $85 to $250 depending on scope and whether your door meets current wind-load requirements under Florida Building Code.

Table of Contents

• Spring Replacement: The Most Common (and Most Misquoted) Job
• Cable Repair: Small Part, Big Labor Component
• Panel Replacement: When Fixing Beats Replacing
• Opener Repair: The Specialty Most Contractors Overlook
• Full Door Replacement: What a Hollywood Installation Really Costs
• Florida Permits and Code Requirements: The Hidden Line Item
• How to Evaluate a Quote Against These Benchmarks
• Common Mistakes to Avoid
• When to Call a Professional
• Frequently Asked Questions

Spring Replacement: The Most Common (and Most Misquoted) Job

A garage door spring replacement in Hollywood typically runs $180 to $340 for a standard torsion spring setup, and $160 to $280 for an extension spring conversion on older doors. The wide spread isn’t contractor greed. It’s physics and material quality. Door weight, spring cycle rating, and whether you have one spring or two determine where your quote lands.

Torsion springs are rated in cycles: 10,000-cycle springs, 25,000-cycle springs, and 50,000-cycle springs. A 10,000-cycle spring costs $45 to $75 per spring at wholesale. A 25,000-cycle spring runs $90 to $140. The higher-cycle spring costs double upfront but lasts two to four times longer under daily use. In Hollywood, where most homeowners use their garage as the primary entry point, doors cycle 3 to 5 times per day, not the national average of 1 to 2. A 10,000-cycle spring may fail in 6 to 8 years here. A 25,000-cycle spring typically lasts 12 to 15.

Why Two Springs Cost More (And Why You Should Replace Both)

Most double doors have two springs. When one breaks, the other is usually within 6 to 12 months of failing. It has cycled exactly as many times. A single spring replacement on a two-spring door costs $120 to $200. Replacing both costs $220 to $340. The second option feels more expensive, but it avoids a second service call fee within the year. Service call fees alone run $59 to $85 in Hollywood. The “cheaper” single-spring fix rarely saves money over 18 months.

We service every major spring system on the market: torsion, extension, and the newer torque-master setups found on Wayne Dalton and Clopay installations throughout Hollywood. The torque-master spring, concealed inside a tube, often gets misdiagnosed by generalist handymen as a cable or bracket issue. That’s a diagnostic difference you pay for in time, but not in parts.

Hollywood-Specific Pricing Factors

• Salt air exposure: Homes within 2 miles of the Intracoastal or Atlantic see faster spring corrosion. Springs on these homes often need replacement 1 to 2 years earlier than inland Hollywood properties.
• Door material weight: Solid wood carriage doors, common in older Hollywood Lakes and Lakes of Emerald Hills neighborhoods, weigh 250 to 400 pounds. Heavier doors require heavier springs, which cost $15 to $30 more per spring.
• Spring wire gauge: A .250 gauge spring costs more than a .225 gauge spring of the same length. Quotes that don’t specify gauge are hiding their material quality.

Cable Repair: Small Part, Big Labor Component

Cable replacement in Hollywood runs $95 to $225. The cable itself is a $10 to $25 part. You’re paying for the labor and the risk. Cables are under the same tension as springs. A frayed cable snapping under load can whip with enough force to cause serious injury. This is not a DIY job, and the price reflects it.

Cables fail in two ways in South Florida. The first is wear: rust from humidity and salt air attacks the steel strands, causing fraying at the drum or bottom bracket. The second is trauma: a door that goes out of balance after a spring breaks will spool the cable unevenly, fraying it in days. If your cable snapped, a spring imbalance almost certainly caused it. A technician who replaces the cable without checking spring balance is selling you a repeat failure.

Cable Repair vs. Cable Replacement: Know the Difference

Some companies advertise “cable repair” at $49 to $75. That price covers re-spooling a cable that has slipped off the drum, not replacing a frayed one. Re-spooling is legitimately cheaper if the cable is intact. But a cable that has jumped the drum has usually been stretched or damaged. Re-spooling a compromised cable is a band-aid. In our experience across Hollywood, about 60% of cables that jump the drum need full replacement within 3 months. When you get a quote, ask: “Does this price include new cables or just re-spooling?” The difference should be listed as a line item.

Panel Replacement: When Fixing Beats Replacing

A single garage door panel replacement costs $350 to $900 in Hollywood, including the panel, labor, and hardware matching. That’s a meaningful investment, but it’s far less than the $1,400 to $3,800 a full door replacement runs. The challenge is matching. Doors older than 10 years have faded. The new panel will not match the old ones perfectly. In direct South Florida sun, that mismatch becomes obvious within 12 to 18 months as the new panel fades at a different rate.

Panel replacement makes sense when the damage is isolated: a dented bottom panel from a bike hit, a cracked panel from a storm-driven branch, or a delaminated section from water intrusion. It makes less sense when the door is older than 15 years, when panels are no longer manufactured, or when multiple panels show damage. Amarr and Clopay make quality replacement panels, but discontinued models from doors installed pre-2015 often require a full door replacement simply because no matching panel exists.

When a Panel Repair Makes Financial Sense

1. Your door is less than 10 years old and the model is still in production.
2. Only one panel is damaged and the door operates smoothly otherwise.
3. You plan to stay in the home 5+ years, spreading the cost.
4. The door is a standard size and color (white, almond, or brown).

For more on when repair beats replacement, see our guide on garage door repair in Hollywood.

Opener Repair: The Specialty Most Contractors Overlook

Opener repair in Hollywood costs $175 to $450. That includes the service call, diagnostic time, and the specific repair. A full opener replacement runs $450 to $850 for the unit and installation. What you pay depends on whether the problem is mechanical (gears, sprockets, chain or belt), electrical (logic board, capacitor, transformer), or setup-related (travel limits, force settings, sensor alignment).

Here’s where brand expertise changes the price you pay. A technician who works on LiftMaster daily will diagnose a logic board failure in 15 minutes. A generalist who “figures it out as he goes” bills you for an hour of troubleshooting and may still misdiagnose the problem. We treat garage door opener repair in Hollywood as a dedicated specialty covering mechanical failures and smart-home integration issues with Chamberlain, Genie, LiftMaster, and Craftsman systems. That focus means faster diagnosis and fewer return visits, which is where homeowners actually save money.

Common Opener Failure Costs in Hollywood

• Gear replacement: $180 to $280. Plastic gears inside older screw and chain-drive openers strip over time. This is the most common mechanical failure we see in Hollywood.
• Logic board replacement: $150 to $300. Surge damage from summer thunderstorms is the usual culprit. South Florida’s lightning season runs May through October.
• Sensor repair or replacement: $95 to $175. Sensors fail from moisture intrusion or alignment drift. Hollywood’s humidity accelerates corrosion on sensor connections.
• Remote or keypad replacement: $50 to $125 per unit. Programming is usually included in the service call.

The question we hear most often: “Is it worth repairing a 15-year-old opener?” Our honest answer: if the repair is under $150 and the opener is mechanically sound, fix it. If the repair exceeds $200 on a unit over 12 years old, put that money toward a new opener. You’re chasing diminishing returns on a part designed for a 10 to 12-year service life.

Full Door Replacement: What a Hollywood Installation Really Costs

A full garage door replacement in Hollywood costs $1,400 to $3,800 in 2026. The range covers a basic single steel door at the low end to an insulated double door with windows and upgraded hardware at the high end. Custom wood doors and high-end carriage styles from manufacturers like Clopay push the number past $5,000.

Here is the line-item reality of a Hollywood installation:

Typical Replacement Door Job Breakdown

• Door unit (steel, non-insulated, single): $450 to $800
• Door unit (steel, insulated, double): $1,200 to $2,200
• Labor (removal, installation, balancing): $450 to $900
• Tracks, rollers, hinges, and hardware: $150 to $400
• Disposal of old door: $75 to $150
• Weather sealing and trim: $50 to $200
• Permit fees (see below): $85 to $250

The Hollywood Climate Factor

Humidity and hurricane season aren’t just weather. They’re material selection inputs. A non-insulated steel door installed 3 miles from the ocean will show rust at the bottom within 5 years without proper sealing. An insulated door with a rust-resistant composite or polymer coating lasts longer but costs $300 to $600 more upfront. Wayne Dalton and Amarr both make door lines designed for coastal environments. The upgrade is cheaper than replacing a rusted door in year 7.

For a full breakdown of what installation involves, see our garage door installation guide for Hollywood.

Florida Permits and Code Requirements: The Hidden Line Item

Hollywood, FL requires a permit for full garage door replacement. The permit fee runs $85 to $250 depending on the door’s value and whether additional structural work is required. If your contractor doesn’t mention permits, that’s a warning sign. Unpermitted work can create problems when you sell the home, and Florida Building Code wind-load requirements are not optional. A door that fails wind-load inspection can become a liability in a storm.

Here’s what the permit process looks like in Hollywood:

1. Contractor pulls the permit: A licensed contractor applies to the City of Hollywood Building Division. The fee is based on the job valuation.
2. Wind-load documentation: The door must meet Miami-Dade County’s High Velocity Hurricane Zone standards. Most name-brand doors from Clopay, Amarr, and Wayne Dalton are pre-approved, but the specific model and size must be documented.
3. Inspection: After installation, a city inspector verifies the door, tracks, and mounting meet code. This typically happens within 1 to 2 weeks in Hollywood.
4. Final approval: The permit closes, and the work is on the property record.

Repair work, including spring and cable replacement, does not require a permit. Opener replacement does not require a permit unless new electrical circuits are being added. Most opener replacements use the existing outlet. If you’re replacing a door, ask your contractor about permits before signing. A contractor who says “we don’t need one for this” on a full door replacement is not doing you a favor.

How to Evaluate a Quote Against These Benchmarks

The goal isn’t to challenge every dollar. It’s to confirm you’re being charged for real work with real parts. Here’s a practical process for Hollywood homeowners:

1. Check the line items. A legitimate quote lists materials, labor, and permit fees separately. A quote that says “garage door repair: $450” with no breakdown gives you no way to evaluate it against these benchmarks.
2. Ask about the parts. For springs, ask the cycle rating. For panels, ask the manufacturer. For openers, ask the brand and model. If the contractor won’t specify, the quote is incomplete.
3. Compare to the benchmarks in this guide. If a spring replacement quote is $550, the price is high for Hollywood. If it’s $120, the parts are likely low-cycle. Both situations deserve a question.
4. Confirm the permit plan for installations. A legitimate Hollywood contractor factors permit costs into the quote. If the price seems too low on a full replacement, ask whether permits are included.
5. Trust the diagnostic conversation. A contractor who asks about your door’s history, checks both springs, and tests the balance before quoting is doing real diagnosis. A contractor who quotes over the phone without seeing the door is giving you a price, not an estimate.

The right question isn’t “why does this cost so much?” It’s “what am I getting for this price?” A $250 spring replacement that uses 25,000-cycle springs and includes a balance check is a better deal than a $180 replacement that uses 10,000-cycle springs and skips the balance work. Evaluate the value, not just the number.

Common Mistakes to Avoid

• Replacing one spring on a two-spring door. You’ll pay for a second service call within a year. Both springs cycle together and fail together. Replace both.
• Choosing the cheapest spring based on price alone. 10,000-cycle springs are fine for a garage used as storage. In Hollywood, where the garage is often the primary entry, 25,000-cycle springs are the better value over time.
• Painting over rust without addressing the cause. Salt air corrosion on a door bottom doesn’t stop with a coat of paint. The metal is compromised. Seal and treat, or replace the panel before the rust spreads.
• Ignoring a noisy door. Squealing and grinding aren’t nuisance sounds. They’re mechanical signals. A door that grinds for 6 months turns a $200 repair into a $500 repair.
• DIY-ing spring work. The tension on a torsion spring can break bone. Every year, homeowners in South Florida are seriously injured attempting this repair. The $200 to $300 you save isn’t worth the risk.
• Forgetting the permit on a full replacement. Unpermitted work shows up on inspection reports when you sell. The Hollywood Building Division doesn’t grandfather unpermitted doors.
• Assuming all contractors service your door brand. Some dealers only install their own line. If your door is a Raynor and the contractor only works on Clopay, you won’t get an honest recommendation.

When to Call a Professional

A broken spring, a snapped cable, or a door that won’t open are obvious calls. But you should also call when a door starts making a new noise, when it opens slower than it used to, or when one side of the door hangs lower than the other. These are early indicators. In Hollywood’s climate, small problems become big ones faster than they do inland. Humidity accelerates rust. Salt air attacks metal. A door that gets ignored through one summer will cost more to fix after it.

Opener issues deserve the same urgency. If your opener reverses for no reason, if the remote works intermittently, or if the motor runs but the door doesn’t move, call before the failure strands your car inside or outside the garage. Benchmark Garage Door Repair offers free estimates in Hollywood and services all major brands. Call (833) 589-8332.

Frequently Asked Questions


How much does garage door repair cost in Hollywood, FL?
+



How much does a garage door spring replacement cost in Hollywood?
+



Does Hollywood, FL require a permit for garage door replacement?
+



Can you fix my garage door the same day?
+



Will the price change once the technician sees my door?
+



Do you carry parts on the truck for same-day repairs?
+



How long should a garage door last in South Florida?
+

The Bottom Line

A Hollywood garage door repair should cost between $95 and $450 for most component-level fixes. Full replacement runs $1,400 to $3,800, plus $85 to $250 for permits. The numbers in this guide are built from what we see on service calls across Hollywood every week, not from national averages. Use them to evaluate quotes, ask the right questions, and avoid overpaying for underspecified work. When you need an honest diagnosis and a fix that lasts, call Benchmark Garage Door Repair at (833) 589-8332. We service what you already have, and we’ll tell you what it actually needs. No upsell, no guesswork, no second call.

Written by the team at Benchmark Garage Door Repair, serving Hollywood, FL since 2011.